Law Of Affirmation Wall decals may be applied to hard, clean, smooth and dry surfaces. Some textured walls may not work well. Our wall decals are removable but not reusable! Please use caution when removing wall decals. Depending on the age or condition of the painted surface underneath, some touch ups may be necessary.

 

 

Figure out where you would like your decal(s) placed. Make markings and measurements as needed. Also, be sure your surface is clean and dry (if applying to drywall). If your drywall surface is damp or dirty, clean it using a mild soap and water solution and wait for the surface to dry completely before application.

Now, take hold of your decal. You will notice there are three layers. The transfer paper (which looks like white masking tape), the decal itself, and the paper backing to the decal. (the paper backing will also have the vinyl manufacturer's logo displayed (Avery).

Gently peel the hard paper backing away from the transfer paper. While you're doing this, the decal should be left sticking to the transfer paper. The adhesive side of both the transfer paper AND your decal will be exposed.

Now, place your decal on the wall with the transfer paper, (sticky side on the wall) and make sure it's where you want it. Take a credit card or some other type of thin, hard plastic, and gently smooth out the surface starting from the middle and moving outward. This will allow the adhesive to stick better, as well as remove any air bubbles in your decal.

Once you have smoothed out your decal, it is safe to remove the transfer paper. Just start at one corner and peel away slowly and close to the surface, making sure your decal doesn't peel up with it. If you notice more air bubbles, gently smooth out the decal again once you have removed the transfer paper. All done!


For Decoration Tips, Please Click Here